Window Replacement in Acworth

Acworth homeowners have been calling Quality Touch for window replacement since many of the neighborhoods here were first built in the late 1990s and early 2000s. We serve the entire Acworth area, from established Cobb County subdivisions along Wade Green to the communities tucked along Lake Allatoona. If your home is 15 to 25 years old and the windows are starting to show their age, you already know the signs: fogged glass, drafts near the frames, higher utility bills. Our team handles the full replacement from measurement to cleanup, with no subcontractors. Learn more about what we install on our window replacement page.

We are based in Suwanee, about 53 miles from Acworth, and we make the drive regularly. Cobb County is a big part of our service area, and Acworth is one of the more active markets we work in. Homes here tend to be traditional brick construction with mature trees and wide lots, and they are exactly the type of property that benefits most from a well-done window replacement.

Why Acworth Homeowners Replace Their Windows

Most homes in Acworth were built between 1990 and 2010. That puts the original windows at 15 to 35 years old, which is squarely in the range where single-pane or early double-pane units start failing. Seals break, frames warp, and the insulating gap between panes fills with condensation. Once that happens, no amount of caulking or weatherstripping repairs the performance loss.

Georgia summers hit Acworth hard. Afternoon heat coming through south and west-facing windows drives up cooling costs in July and August. Older windows in brick homes often lack the low-E coatings that reflect radiant heat before it enters the house. Replacing them with Energy Star certified glass cuts that heat transfer significantly, and the difference shows up on your power bill within the first season.

Acworth also sits at a lower elevation than much of the Atlanta metro, which means humidity is a consistent factor. That moisture stress accelerates frame deterioration, especially in windows with wood or aluminum frames that were common in 1990s construction. Vinyl frames handle humidity without rotting, swelling, or corroding.

What We Install

Every window we install is Energy Star certified for Climate Zone 3, which covers all of Georgia. Our standard double-hung replacement window features a U-factor of 0.27 or lower and a solar heat gain coefficient rated for Georgia summers. That combination keeps heat out in summer and holds warmth in during winter without straining your HVAC system.

Pricing for a standard double-hung replacement window starts at $680 installed. That price includes removal of the old unit, installation, interior and exterior trim work, and full cleanup. There are no surprise charges for standard jobs. For specialty shapes or larger fixed windows, we provide a written quote before any work begins. We also offer door replacement if you want to address both at the same time.

We carry double-hung, casement, picture, bay, and sliding windows. If your Acworth home has a mix of window types, which is common in the larger subdivisions here, we can match or coordinate styles throughout the house in a single project.

Our Installation Process

Most window replacement projects in Acworth are completed in one day. A crew of our certified master installers arrives, confirms measurements against the windows ordered, and works room by room through the house. We protect interior floors and furniture before any work begins.

Each window goes in with our triple weatherstrip barrier, which provides 50% more weather protection than the standard double-strip installation used by most contractors. The frame is shimmed, leveled, and sealed before the interior trim is finished. You can read through our full installation process page to see exactly what each step involves.

We back every installation with our 40 Day Estimate to Install Guarantee. Once you have a signed estimate, your install is scheduled within 40 days. No vague timelines, no waiting months for a crew to show up.

Acworth Neighborhoods We Serve

We work throughout Acworth and the surrounding communities. Current and recent projects include homes in these neighborhoods:

• Bentwater
• Brookstone
• Centennial Commons
• Centennial Lakes
• Greens Crossing
• Heritage Club
• Kellogg Creek
• Sable Trace
• Seven Hills
• Wade Green

If your neighborhood is not listed, call us. We cover all of Acworth regardless of subdivision. We also serve nearby Cobb County communities including Kennesaw, Marietta, and Smyrna.

Windows and Doors for Acworth Homes

Acworth’s housing stock skews toward traditional brick construction with gable rooflines and covered front entries. That architecture pairs well with double-hung windows, which are the most common replacement choice here because they match the original window profile and do not require structural changes to the opening.

Homes in older sections of Acworth, particularly those built before 1995, sometimes have aluminum single-pane windows that are well past their useful life. We replace these with vinyl-framed double-pane units that look sharp against brick exteriors and dramatically outperform the originals on insulation and noise reduction.

For larger homes in communities like Governors Towne Club or the estates along the Lake Allatoona corridor, we also install picture windows and custom bay configurations. These require more precise measurement and a slightly longer lead time, but the installation process is the same: in-house crew, one day, full cleanup.

If your front or back door is drafty or difficult to seal, our door replacement service addresses the same energy and comfort issues as window replacement. Many Acworth homeowners handle both projects together.

Why Quality Touch

We use in-house certified master installers on every job. No subcontractors, no day laborers, no crews hired for the week. The people who show up at your Acworth home are Quality Touch employees who have installed hundreds of windows and know exactly what a correct installation looks like.

Our lifetime warranty covers both the windows and the installation. If a seal fails, a frame cracks, or an install-related issue shows up years later, we come back and fix it at no cost. That warranty is only possible because we control the installation ourselves rather than farming it out.

We have been doing this for over 15 years, and our work is Energy Star certified for Climate Zone 3. Our triple weatherstrip system and precise shimming technique are not standard practice in this industry. They are things we added because they produce better results over time, and Acworth’s combination of summer heat and winter humidity makes those details matter.

Financing is available with no impact on your credit score to check your options. Many Acworth homeowners use financing to replace all the windows in a home at once rather than doing a few at a time over several years.

Get a Free Estimate in Acworth

We offer free in-home estimates throughout the Acworth area. A member of our team comes to your home, measures every window, discusses your options, and gives you a written quote before you commit to anything. There is no pressure and no time limit on the estimate.

Call us at (770) 526-3268 to schedule. We typically have estimate appointments available within a few days, and installation follows within 40 days of signing.

Frequently Asked Questions

How long does window replacement take in an Acworth home?

Most projects are completed in a single day. A four-bedroom home with 12 to 16 windows typically takes 6 to 8 hours. Larger jobs or homes with custom-shaped windows may require two days, which we schedule back to back so your home is not left unfinished overnight.

Do you replace windows in brick homes?

Yes. The majority of homes we work on in Acworth are brick construction. Replacing windows in a brick home is standard work for our crew. The brick opening stays intact and we fit the new window to the existing frame pocket. No masonry work is required for a standard replacement.

My windows are fogged between the panes. Is replacement the only fix?

For sealed double-pane units, yes. Once the seal breaks and moisture enters the insulating gap, the glass cannot be defogged by cleaning or resealing. The entire unit needs to be replaced. In most cases, replacing the window is more cost-effective than replacing just the glass, and you get a new frame and warranty along with it.

Are your windows rated for Georgia summers?

Every window we install is Energy Star certified for Climate Zone 3, which covers Georgia. That rating requires a solar heat gain coefficient low enough to meaningfully reduce cooling loads in a hot, humid climate like Acworth’s. Standard windows sold at home improvement stores are often rated for multiple climate zones and do not perform as well in Georgia conditions.

Do you serve neighborhoods in Cherokee and Paulding County around Acworth?

Yes. Several Acworth-area subdivisions, including parts of Bentwater and Seven Hills, fall in Paulding or Cherokee County rather than Cobb. We serve all of them. County lines do not affect our service area in this part of metro Atlanta.

What financing options are available?

We offer financing with no impact on your credit score to check your rate. Once approved, you can spread the cost of your project over a term that fits your budget. Call us or ask during your estimate appointment for current terms. Details are also available on our financing page.